YSI Turner hydrocarbons Sensor Adapter (TSA)

The YSI Turner Sensor Adapter (TSA) expands water quality monitoring to include third-party analog output sensors. In addition to monitoring for the standard water quality parameters of Temperature, Conductivity, pH, Dissolved Oxygen, Turbidity, Blue-Green Algae, and Chlorophyll, 6-Series customers can now measure hydrocarbons and other parameters from the Turner Cyclops-7® submersible sensor line.

  • Features
  • Specifications
  • Documents

Field Upgradable: The Turner Sensor Adapter Kit can be quickly installed onto existing YSI sondes that may already be deployed. It provides the lowest-cost solution to adding oil monitoring capability to current monitoring locations.

No Wiring: No new wiring or external datalogger required. The YSI sonde supplies power and logs data to its internal memory. If the sonde is already connected to a data logger, then the logger program will only require a slight change to accept additional output parameters over SDI-12.

CDOM Rejection: Using a deep UV LED, interference from naturally occurring CDOM is reduced, thus giving the maximum signal with minimal interfere

Near-Shore Refined Fuels Sensor with CDOM Rejection

Min. Detection Limit 2 ppb NS (1.5 Napthalene Disulfonic Disodium Salt)
Range 0-10,000 ppb NS (1.5 Napthalene Disulfonic Disodium Salt)
Sensor Output (AUX) 0-5 V
Linearity 0.99 R2
Depth 61 meters
Temperature Range 0-50 deg C

Open-Water Crude Oil Detection Sensor

Min. Detection Limit 0.2 ppb QS (Quinine Sulfate)
Range 0-1,500 ppb QS (Quinine Sulfate)
Sensor Output (Aux) 0-5 VDC
Linearity 0.99 R2
Depth 61 meters
Temperature Range 0-50 deg C

CDOM Sensor

Min. Detection Limit 0.4 ppb QS (Quinine Sulfate)
Range 0-2,500 ppb QS (Quinine Sulfate)
Sensor Output (Aux) 0-5 VDC
Linearity 0.99 R2
Depth 61 meters
Temperature Range 0-50 deg C