This adapter converts an EXO sonde signal into either SDI-12 or RS-232.
For SCADA applications, please see our EXO Modbus Adapter.
Note: This product is intended for use in a long term monitoring system. Requires an EXO Sonde, data logger, and flying lead cable to function.
Introducing the EXO DCP Signal Output Adapter 2.0 from YSI, designed with and engineered for compatibility with the EXO sonde platform. As technology continues to develop at record pace, it's more critical than ever to have a flexible sonde that can keep up.
A fundamental part of the EXO Sonde platform is the ability to adapt its communication output to match different monitoring applications. Simply configure a sonde with this adapter and the instrument is then compatible with data loggers and telemetry systems, or PCs and tablets with USB connectivity. Converts the proprietary signal from an EXO Sonde into either SDI-12 or RS-232.
Integrate your EXO sonde into numerous monitoring
applications without the hassle of purchasing all new hardware.
Perform firmware updates to your sonde and
sensors to optimize performance over time.
View your sonde’s logging status at a glance, with
integrated LED indicators built into your monitoring station.
Setup and configure instrumentation without it leaving the water, using USB or passthrough connections.
Communicate directly with an underwater sonde, via USB through an EXO adapter, without having to disturb the Sonde.
|Connectivity / Communications||RS-232 or RS-485|
|Desktop Software Compatible||KOR Software for the EXO Platform|
|Equipment used with||An EXO Sonde, data logger, and an EXO Flying Lead Cable|
|Operating Temperature||–40°C to +60°C|
|Power||Supply Voltage: 9 – 16 VDC or USB 5 VDC, Current Draw Adapter: ~20mA typical (@12 VDC), Current Draw Sonde: ~sleep 0.25mA reading and 100mA during operation, Max Net Current Draw for Systems: ~200mAmps (@12 VDC)|
L= 3.5", W= 3.5", H= 1.5" (89cm x 89cm x 38cm)
|Storage Temperature||–50°C to +80°C|