Manufactured in Germany by Xylem's SI Analytics brand, the TitroLine® 5000 auto-titrator is ideal for routine titrations within the food, beverage and other industrial applications where non-skilled operators are required to fulfill routine tasks.
The TitroLine® 5000 replaces the very successful "TitroLine® Easy," the well-known basic automatic titrator with easy handling and innovative features and a simple Methods system that makes use of pre-loaded procedures making for easy operation.
The new burette TITRONIC® 300 not only allows you to perform dosing operations quickly and easily but also accomplishes manual titrating operations without difficulty. The burette can be used with all dosing liquids, solvents and titrants.
Schott Titroline 7000 pH Titrator with innovative features for simple and easy operation–without sacrificing accuracy. It can store up to 50 user methods with new intelligent, interchangeable modules and lexible configuration features. Perfect for non-aqueous titrations.
Beside the features which are mentioned in the general part of the titration family, the TitroLine® 7500 KF offers more performance and is the volumetric generalist for a wide range of use.
The easy to use data loggers with USB connection monitor the temperature and/or humidity during transport and storage of sensitive goods like medicine, food, serums etc. The EBI 300 and EBI 310 USB data loggers are suitable for multi-use, the EBI 330 USB data loggers are single-use versions which can be ordered preconfi gurated and are used especially when returning a more expensive multi-use data logger to the sender after a shipment is diffi cult. Please contact us for more information.
Cost effective core thermometer with folding penetration probe for general temperature measurement during transport, storage and incoming goods inspection and other processes that require fast measurement in a convenient package. Optional coloured "rings" are available so that segregation of meters between media types within hygienic applications may occur such as for the measuring of different meat types in cold storage.
TLC 730 Dual-Infrared / Fold-Back-Thermometer with foldable penetration probe and infrared sensor ideal for temperature measurements in supermarkets and cold chain distribution. Being dual core and infrared, the TLC 730 is very convenient as it allows both contact and surface measurement from one small unit.
TFI 250 infrared non contact thermometer with adjustable emissivity. Ideal for all non contact measurements at close range. Hygienic for food use in supermarket and cold chain as well as other general temperature measurement.
For measuring and control tasks in industry, trade and crafts, climate control systems, fast refrigerated goods checks, incoming goods inspection, storage and laborabory.
Knowing when to change the cooking oil in deep fat fryers is paramount in terms of taste and toxins! The FOM 330 is a simple tool for testing the quality of cooking oil so that food tastes fresh and is not impaired by the flavours left behind by previous cooking. FOM 330 Food Oil Monitor Set with simple oil type selection. Supplied complete in a aluminium carry case, this kit is ideal for use in restaurants and as an inspection tool for food safety inspectors.
EBI 25 wireless temperature and humidity data logger system with radio technology for use in cold stores, warehouses, supermarkets and other environments that need constant monitoring of temperature and/or humidity so that stored goods are protected. The starter kit comes complete with remote sensors, wall brackets, interface station and software. Once installed, the system continually monitors the required parameters and transmits the results to the PC (not supplied). Simple to install protection for critical environments.
The Ebro TFX 410 thermometer is ideal for all manner of applications within the food processing industry as well as other applications where deep sample penetration is required such as in the Mash Tun of a brewing process or deep within a cooking sauce that requires a critical temperature to be reached. The instrument has a detachable probe and many different styles of temperature sensor are available making this a most versatile instrument for measuring temperature within a critical process.
The ADP400 Series (ADP450 and ADP430) from Bellingham + Stanley are single wavelength polarimeters suitable for sugar, food, chemical and pharmaceutical industries. These polarimeters are available with or without XPC - Xylem's patented internal Peltier temperature control system. Both models use standard polarimeter tubes with a maximum length of 200mm. For fast performance in the Peltier controlled version, stainless steel tubes should be used. Low volume samples are also catered for with the addition of stainless steel, luer taper tubes.
The all new RFM300-M series refractometers are the ultimate instruments for installation in demanding factory environments as well as for use as a primary quality control tool.
The RFM300 now boasts a 7" touchscreen user interface with easy to use menus giving this powerful refractometer, suitable for harsh factory environments, a fresh modern look and feel.
RFM700-M series refractometers are robust, low cost, fully automatic instruments that are ideally suited to the food, sugar and beverage industries but can now be used in many other non food applications where use of temperature control is not required.
Bellingham + Stanley designed OPTi digital handheld refractometers are manufactured in the UK as highly reliable premium quality instruments suitable for use in the harshest of environments across a wide application scope. Buy today from our online store.
Handheld refractometers are low-cost, portable instruments used for ‘on the spot’ determination of Refractive Index (RI) of liquids or the concentration of solutions. Offering a choice of scales, Eclipse refractometers can be used in a multitude of applications across many and varied industries.
The RFM900-T Series of Peltier temperature controlled refractometers combine latest opto-electronic principles with durability and ease of use via a touchscreen user interface. Offering a wide refractive index range and high precision measurement to six decimals RI, the RFM970-T version is ideal for use in pharmaceutical applications operating in accordance with Pharmacopeia and FDA regulation 21 CFR Part 11; as well as in petrochemical, chemical, and aroma applications.
For many years, beverage manufacturers have adopted digital refractometers as their primary instrument for measuring the final dilution ratio (°Brix) of re-constituted fruit juice not only to assure product quality but also in an attempt to reduce losses by tightly controlling concentrate yields. However, due to the nature of the sample, common refractometers show a variation in the reading caused by sample settling. The Pro-Juice refractometer conditions the sample prior to measurement allowing for extremely precise analysis to be made allowing for higher yields from concetrates that translates directly to increased profits for orange juice packers.
Application oriented benchtop sets for multiple parameter monitoring: pH, mV, ISE, saturation, concentration, partial pressure, conductivity, special resistance, salinity, TDS, temperature
Cutting edge technology from WTW for demanding laboratory applications. Two digital inoLab® multi-parameter instruments for IDS sensors for parallel measuring of one identical or varying parameters. Up to three sensors (inoLab® Multi 9430 IDS) can be connected. A large glass shield protects the graphic display and supports the presentation of the measuring values and recognition of important information. The innovative and antibacterial keypad helps to protect against microbiological contamination. The solid zinc die-casting lower case gives the meters a safe standing and also protection from the environment. As a special feature, both models can be upgraded with an additional module for conventional pH measurement.
The inoLab® family: Advanced measuring technology offers new functions including automatic AutoRead or CMC (Continuous Measurement Control) making measurements more convenient and reliable than ever.
The user interface, large display and keypad with tactile feedback provide an exceptional user experience and error-free operation.
All benchtop meters are available in application oriented sets including sensors and accessories.
OxiTop® systems for BOD or other depletion / respiration applications
- Complete packages ready to use
- Simple, flexible, secure, compliant, customisable and scalable
- Mercury-free pressure measurement
Connect digital IDS sensors to the Inolab for the measurement of pH, ORP, conductivity, and DO/BOD.
- Uncompromised measuring accuracy
- Digital sensor recognition
- Smart sensor evaluation
YSI MultiLab ProODO instrument provides easy to use and calibrate menu-driven operation ideal for the laboratory, with special BOD features.
Precise pH/ISE benchtop meter with enhanced ISE methods for concentration measurement with ion selective electrodes
- Simultaneous measurements of pH, ion concentration or ORP
- Flexible and convenient data transfer
- Visualization of the optimum measuring range supports correct measurements (CMC function)
To heat up liquids quickly and safely, SI Analytics hotplates SLK 12 are the optimum solution. The heating power can be adjusted in 9 steps and heats up to 1.7 kW (with extended hotplate step 2 and the 230 V version only).
Using our new SI Analytics laboratory stirrer with heating, the process of mixing liquids can be selected from careful to intense, and the device can be also be used for speedy heating up or controlled temperature adaptation.
Our 2nd generation of Handylab devices offers analog or digital options for the measurement of pH, ORP, dissolved oxygen and conductivity in the lab and in the field.
The new generation of HandyLab meters with IDS
While the analog HandyLabs offer a single traditional analog channel, our IDS series Handylab 600 and 680 devices take full advantage of our new digital technologies.
Steam-sterilizable, low-maintenance pH and redox electrodes, also with built-in temperature sensors for applications in biotechnology, food technology and process chemistry
The special construction of the ProcessLine electrodes brings them very close to the optimum for liquid electrolyte electrodes with respect to their accuracy, stability, rapid response and long working life.
Our Memosens® program contains pH and redox electrodes. They are compatible to all at the market available measuring devices based on the Memosens® protocol. Following the in the analog segment already established electrodes of the series ProcessLine, SteamLine and annular-gap electrodes our new Memosens® electrode program also contains the upcoming FlowLine series. FlowLine is a new line of liquid-electrolyte electrodes with integrated plastic miniature pressure adapter for the hose connection to the electrolyte reservoir. All Memosens® electrodes are equipped with a NTC 30 kΩ temperature sensor.
The development and production of these high-quality armatures and its control systems is based on our experience originating from more then 70 years within the area of liquid analysis. Thanks to the constant active contact to our customers we are aware that basically every application has its own requirements. The reliable measuring of pH, redox, conductivity and D.O. values up to temperature within the process requires individual solutions. This affects all industrial branches, whether within the water treatment, food industry, biotechnology or chemical and pharmaceutical productions.
The photoLab® 7000 series of spectrophotometers combine latest optical technology with digital processing to provide users with an efficient and effective means of gathering spectrophotometric data in chemical, pharmaceutical, food, beverage and especially environmental applications. Special software features include up to 200 industry standard scales/methods and the unique OptRF feature for determining nitrate and nitrate without the need for reagents. Additionally, photoLab Data software expands its capability by displaying results in industry standard color scales including CIE, EBC, ASTM, ICUMSA and so on.
The YSI 2900 features an intuitive graphical user interface, a USB port for data retrieval, and the ability to measure samples from a variety of sample holders including 96 well plates and microcentrifuge tubes, making 2900 series analyzers the easiest to use and most cost effective way to measure the following chemistries in a wide range of application areas.
YSI has earned a reputation as the Gold Standard in bio-analytical instruments with highly accurate sensors and rapid results. The key to generating analyte-specific results in 60 seconds or less is YSI's innovative biosensor technology.