Laboratory Environmental

Challenges such as proper sampling procedures, lab practices, and experimental design are all critically important in obtaining reliable laboratory data. However, the instrumentation used for data collection must not be overlooked. At Xylem we have the water quality laboratory instrumentation needed for accurate measurement of parameters such as pH, ORP, dissolved oxygen, conductivity, temperature, ammonium, ammonia, nitrate, chloride, fluoride, and many other ionic species.

  • Multiparameter
  • pH / ORP / ISE
  • Turbidity
  • Dissolved Oxygen / BOD
  • Conductivity
  • Photometers & Spectrophotometers
WTW MultiLine® IDS

WTW MultiLine® IDS

The new multi-parameter systems with intelligent, digital sensors for pH, dissolved oxygen (DO) and conductivity measurement revolutionize multi-parameter measurement:
The signal processing is completely located in the sensor, and the measuring signal is transmitted to the meter without interference and in a clearly identifiable manner via thin, highstrength cables. A wide range of sensors are available for virtually every application.

WTW 9310

WTW inoLab® IDS - Benchtop

Connect digital IDS sensors to the Inolab for the measurement of pH, ORP, conductivity, and DO/BOD.

  • Uncompromised measuring accuracy
  • Digital sensor recognition
  • Smart sensor evaluation

WTW Inolab pH/Ion 7320

WTW InoLab® pH/Ion 7320

Precise pH/ISE benchtop meter with enhanced ISE methods for concentration measurement with ion selective electrodes

  • Simultaneous measurements of pH, ion concentration or ORP
  • Flexible and convenient data transfer
  • Visualization of the optimum measuring range supports correct measurements (CMC function)

1030W Aurora

OI Analytical Aurora 1030W TOC Analyzer

The Aurora 1030W TOC Analyzer processes aqueous samples for analysis of the total organic carbon (TOC), total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC) content of the samples.

Aurora 1030C TOC Analyzer

OI Analytical Aurora 1030C TOC Analyzer

The Aurora 1030C TOC Analyzer processes aqueous samples for analysis of the total organic carbon (TOC), total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC) content of the samples. Samples containing 100 ppb to 30,000 ppm of organic carbon can be analyzed. The Aurora 1030C supports USEPA-approved methods, Standard Methods, ASTM, DIN/ISO/CEN, and EU Methods. Depending upon the protocol employed, up to 300 samples per 24-hour period can be analyzed, and in excess of 100,000 samples per year.

OI Analytical 1088 Rotary TOC Autosampler

OI Analytical 1088 Rotary TOC Autosampler

The 1088 Rotary Autosampler is specifically designed to operate with the Aurora 1030W TOC analyzer  or  Aurora 1030C TOC analyzer. The 1088 autosampler aspirates liquid samples from vials and transfers each sample aliquot to an Aurora 1030 TOC analyzer for analysis. A removable 88-position autosampler tray loads the sample vials for fully automated, unattended operation.

OI Analytical 1030S TOC Solids Analysis Module

OI Analytical 1030S TOC Solids Analysis Module

The 1030S Solids Module is a sample preparation module enabling the analysis of the total organic carbon (TOC) or total carbon (TC) content in solid materials. The 1030S module is operated in conjunction with an Aurora 1030W or 1030C TOC analyzer.

OI Analytical Flow Solution™ FS 3700 Automated Chemistry Analyzer

OI Analytical Flow Solution™ FS 3700 Automated Chemistry Analyzer

The FS 3700 Automated Chemistry Analyzer is an advanced continuous flow analyzer designed to improve laboratory productivity by automating wet chemistry test procedures.

OI Analytical 4100 Water/Soil Sample Processor

OI Analytical 4100 Water/Soil Sample Processor

The OI Analytical 4100 Water / Soil Sample Processor automates the handling and processing of samples in 40-mL VOA vials for purge-and-trap analysis of volatile organic compounds (VOCs) in accordance with U.S. EPA methods. The 4100 efficiently processes up to 100 drinking water, wastewater, or soil samples and operates with a single or dual Eclipse 4760 purge-and-trap instruments.

4551A-autosampler

OI Analytical 4551A Purge-and-Trap Water Autosampler

The M4551A Purge-and-Trap Water Autosampler achieves results by automating VOC analysis of up to 51 samples. Vertical docking of the autosampler to the Eclipse 4760 Sample Concentrator means no extra benchspace is used. The removable, lightweight sample carousel makes sample loading and unloading easy, while its spiral design optimizes septum-piercing accuracy. With its proven, reliable sample handling system, the Model 4551A gets the job done, sample after sample.

LV 20

OI Analytical LV-20 Standards Addition Module

The LV-20 Standards Addition Module is an option for the 4551A Purge-and-Trap Autosampler that injects programmed volumes (1, 2, 5, 10, or 20 microliters) of internal standard, surrogate or matrix spike standards to improve the accuracy and precision of GC-GC-MS analyses.

PFPD 5383 controller and sensor

OI Analytical Pulsed Flame Photometric Detector (PFPD)

OI Analytical's patented* Model 5383 Pulsed Flame Photometric Detector (PFPD) represents the latest advance in flame photometric detector design, optimizing selective detection of sulfur, phosphorus, and 26 other compounds.

OI Analytical 4760

OI Analytical Eclipse 4760 Purge-and-Trap Sample Concentrator

The Eclipse 4760 Purge and Trap Sample Concentrator sets a new standard for ease-of-use for volatile organic compound (VOC) analysis. The new 4th generation system includes the popular features from the Eclipse platform that chemists around the world rely on for accurate, dependable results along with technology enhancements, intuitive software, and a slim-line, open architecture design that saves bench space and allows easy access to components.

WTW Inolab 9430

WTW inoLab® pH Benchtop Meters

The inoLab® family: Advanced measuring technology offers new functions including automatic AutoRead or CMC (Continuous Measurement Control) making measurements more convenient and reliable than ever.
The user interface, large display and keypad with tactile feedback provide an exceptional user experience and error-free operation.
All benchtop meters are available in application oriented sets including sensors and accessories.

WTW MultiLine® IDS

WTW MultiLine® IDS

The new multi-parameter systems with intelligent, digital sensors for pH, dissolved oxygen (DO) and conductivity measurement revolutionize multi-parameter measurement:
The signal processing is completely located in the sensor, and the measuring signal is transmitted to the meter without interference and in a clearly identifiable manner via thin, highstrength cables. A wide range of sensors are available for virtually every application.

WTW 9310

WTW inoLab® IDS - Benchtop

Connect digital IDS sensors to the Inolab for the measurement of pH, ORP, conductivity, and DO/BOD.

  • Uncompromised measuring accuracy
  • Digital sensor recognition
  • Smart sensor evaluation

WTW Inolab pH/Ion 7320

WTW InoLab® pH/Ion 7320

Precise pH/ISE benchtop meter with enhanced ISE methods for concentration measurement with ion selective electrodes

  • Simultaneous measurements of pH, ion concentration or ORP
  • Flexible and convenient data transfer
  • Visualization of the optimum measuring range supports correct measurements (CMC function)

WTW MultiLine® IDS

WTW MultiLine® IDS

The new multi-parameter systems with intelligent, digital sensors for pH, dissolved oxygen (DO) and conductivity measurement revolutionize multi-parameter measurement:
The signal processing is completely located in the sensor, and the measuring signal is transmitted to the meter without interference and in a clearly identifiable manner via thin, highstrength cables. A wide range of sensors are available for virtually every application.

WTW 9310

WTW inoLab® IDS - Benchtop

Connect digital IDS sensors to the Inolab for the measurement of pH, ORP, conductivity, and DO/BOD.

  • Uncompromised measuring accuracy
  • Digital sensor recognition
  • Smart sensor evaluation

wtw-lab-photoflex

WTW Portable colorimeter pHotoFlex® STD

The portable pHotoFlex® STD with energy-efficient LED optics is equipped with 6 wavelengths and a foldable adapter for various applications with 16 mm and 28 mm cuvettes, for even the smallest concentrations.

csm_wtw-208211-oxitop_is_12-oxitop_measurement-pers_4549323e3f_001.jpg

WTW BOD self check measurement OxiTop®

OxiTop® systems for BOD or other depletion / respiration applications

  • Complete packages ready to use
  • Simple, flexible, secure, compliant, customisable and scalable
  • Mercury-free pressure measurement

WTW MultiLine® IDS

WTW MultiLine® IDS

The new multi-parameter systems with intelligent, digital sensors for pH, dissolved oxygen (DO) and conductivity measurement revolutionize multi-parameter measurement:
The signal processing is completely located in the sensor, and the measuring signal is transmitted to the meter without interference and in a clearly identifiable manner via thin, highstrength cables. A wide range of sensors are available for virtually every application.

WTW 9310

WTW inoLab® IDS - Benchtop

Connect digital IDS sensors to the Inolab for the measurement of pH, ORP, conductivity, and DO/BOD.

  • Uncompromised measuring accuracy
  • Digital sensor recognition
  • Smart sensor evaluation

YSI MultiLab IDS Kit

YSI MultiLab ProODO Kit

YSI MultiLab ProODO instrument provides easy to use and calibrate menu-driven operation ideal for the laboratory, with special BOD features.

YSI ProOBOD Optical BOD Probe

YSI ProOBOD Optical BOD Probe

The ProOBOD® self-stirring optical BOD probes are designed to fit into standard 300 mL BOD bottles with an international version also available for use with other tapers.

WTW inoLab® Multi 9430 IDS

WTW inoLab® Laboratory Multi-parameter Benchtop Meters

Application oriented benchtop sets for multiple parameter monitoring: pH, mV, ISE, saturation, concentration, partial pressure, conductivity, special resistance, salinity, TDS, temperature

Cutting edge technology from WTW for demanding laboratory applications. Two digital inoLab® multi-parameter instruments for IDS sensors for parallel measuring of one identical or varying parameters. Up to three sensors (inoLab® Multi 9430 IDS) can be connected. A large glass shield protects the graphic display and supports the presentation of the measuring values and recognition of important information. The innovative and antibacterial keypad helps to protect against microbiological contamination. The solid zinc die-casting lower case gives the meters a safe standing and also protection from the environment. As a special feature, both models can be upgraded with an additional module for conventional pH measurement.

WTW MultiLine® IDS

WTW MultiLine® IDS

The new multi-parameter systems with intelligent, digital sensors for pH, dissolved oxygen (DO) and conductivity measurement revolutionize multi-parameter measurement:
The signal processing is completely located in the sensor, and the measuring signal is transmitted to the meter without interference and in a clearly identifiable manner via thin, highstrength cables. A wide range of sensors are available for virtually every application.

WTW 9310

WTW inoLab® IDS - Benchtop

Connect digital IDS sensors to the Inolab for the measurement of pH, ORP, conductivity, and DO/BOD.

  • Uncompromised measuring accuracy
  • Digital sensor recognition
  • Smart sensor evaluation

Alt: WTW photoLab® 7600 UV-VIS

WTW photoLab® 7000 Series Spectrophotometer

The photoLab® 7000 series of spectrophotometers combine latest optical technology with digital processing to provide users with an efficient and effective means of gathering spectrophotometric data in chemical, pharmaceutical, food, beverage and especially environmental applications.   Special software features include up to 200 industry standard scales/methods and the unique OptRF feature for determining nitrate and nitrate without the need for reagents. Additionally, photoLab Data software expands its capability by displaying results in industry standard color scales including CIE, EBC, ASTM, ICUMSA and so on.

wtw-lab-photoflex

WTW Portable colorimeter pHotoFlex® STD

The portable pHotoFlex® STD with energy-efficient LED optics is equipped with 6 wavelengths and a foldable adapter for various applications with 16 mm and 28 mm cuvettes, for even the smallest concentrations.