The Sewage Lift Station Wastewater Level Sensor's "Steelcage" design offers the highest reliability in level measurement for severe high solids environments such as sewage, lift stations, storm canals, wet wells and slurry tanks.
The lift station transmitter system consists of a submersible pressure sensing element cased in a 316L SST housing. The sensor's electronics are capable of withstanding lightning strikes and meet RCTA/DO 160D for lightning direct effects and surge protection for FAA and MIL-STD test and NASA standard electrical surge requirements. All Sewage Lift Station Wastewater Level Sensors are corrosion resistant and clog free.
The WL430 Sewage Lift Station Wastewater Level Sensor is supplied with 40 ft. of standard polyurethane shielded and vented cable. The unique cable venting system allows for barometric pressure differential compensation while keeping the elements out, using a Gortex filter encapsulated tip. The "Steelcage" design gives full protection and allows sensing to sewage levels no matter how much debris/mud/sand or rags build up.
|Supply Voltage:||8 - 38 Vdc|
|Zero Balance:||± 1% Full Scale Output (FSO)|
|FSO Setting:||± 1% FSO|
|Resolution:||Infinite ( ±0.001% FSO usable)|
|Response Time:||< 5 mS|
|Insulation Resistance:||1000 MO @ 50 Vdc|
|Warm-Up:||< 10 mS|
|Power Supply Effect:||= ± 0.002% FSO per V input|
|Lightning Protected:||MOV and dual gas discharge tube|
|Short Circuit Protected:||Up to 40 Vdc|
|Static Accuracy:||± 0.5% FSO ( BFSL, RSS)|
|(combined effects of non-linearity, hysteresis & repeatability)|
|Repeatability:||± 0.1% FSO|
|Temperature Effects:||± 1.5% FSO over comp range|
|(combined effects of Zero & FSO with reference at 70°F)|
|Long Term Stability:||± 0.25% FSO per year|
|Pressure Ranges:||10psi (23 ft) or 15psi (34 ft)|
|Proof Pressure:||2x Full Scale|
|Burst pressure:||5x Full Scale|
|Materials:||316L SST plus cable|
|Pressure Port:||Flush mount per outline|
|Electrical Connector:||1/2 inch-NPT Male submersible conduit fitting with 40ft of polyurethane cable|
|Dimensions:||3 inch diameter x 6 inch long (7.6 cm dia. x 15 cm long)|
|Weight:||Nominal 20 oz (.57 kg)|
|Compensated Temp Range:||20 to 170°F (-6 to 76°C)|
|Operating Temp Range:||0 to 200°F (-17 to 93°C)|
|Storage temp range:||-20 to 250°F (-28 to 121°C)|
WL430-023 Sewage Lift Station Wastewater Level Sensor (PN# AP0100)
Pressure range: 10psi (23 ft), includes 40 ft of cable
WL430-034 Sewage Lift Station Wastewater Level Sensor (PN# AP0200)
Pressure range: 15psi (34 ft), includes 40 ft of cable
Extra Cable for WL430 sensors
Standard Sewage Lift Station Wastewater Level Sensors include 40 ft of cable, but can be purchased with up to 500 ft of cable.
Please add two weeks for shipping with this option.
WL430-SRG Sewage Lift Station Wastewater Level Sensor Surge Protector (PN# AP0300)
Surge protector provides extra surge and lightning protection for the sewage lift station wasewater level sensor.
Requires 24VDC power.