Xylem Analytics UK - Let's Solve Water - Formerly YSI Hydrodata
Find YSI on Facebook Follow YSI on Twitter Watch YSI on YouTube
Loading

YSI HydroSAM Intake Monitor

Share |

The HydroSAM is designed to replace older water quality monitoring systems that draw samples through a network of pipes which feed a series of in-line sensors. HydroSAM has been designed for minimum maintenance and long-term deployment. The heart of the HydroSAM is a multiparameter probe known as a ‘sonde’, thousands of which are in use all over the world as in situ water quality loggers in both freshwater and marine applications.

This product has received the EA's MCERTS Certification
The compact HydroSAM provides long-term water quality monitoring for intake protection with less maintenance than larger systems. Shown here inside a protective shelter upstream of the water intake.

Get Support

Have a question about your YSI HydroSAM Intake Monitor? Check out the support page with resources compiled just for you.

Contact Technical Support

Repair

Need service for your system? Here you’ll find authorized service centers and instructions on how to get the service you need.

Product Service

Rentals

We have a large pool of water quality and hydrology instruments available to you for rental.


Rentals

The HydroSAM is a complete Sampling and Monitoring water quality station providing continuous data from a compact system measuring parameters such as optical dissolved oxygen, pH, turbidity, conductivity, chlorophyll, blue/green algae, ammonia / ammonium and temperature.

Employing the latest wiped multiparameter technology, the YSI HydroSAM is able to lower the costs associated with running traditional on-line analysers by reducing maintenance visits and on-site time.

Available either in a complete industrial GRP enclosure or wall mounted for installation within an existing building, the YSI HydroSAM is ideal for monitoring of raw water intakes, treated wastewater or receiving waters.

Continuous Monitoring

Water is pushed into the monitoring system by a submersible pummp that can also be provided to backflush preventing biofouling build up.

Water is continuously provided to the adjustable flowcell in which all of the sensors are exposed to the sample. The sensors are all contained within one compact sonde that provides a number of important advantages:

  • A spare sonde, loaded with a complete set of sensors, can be calibrated at a convenient location so that a site visit can involve a quick change of sonde
  • Calibration away from the water hazard means that maintenance visits are quick and only require one person
  • A spare sonde can be used to check that water in the test chamber is truely representative of the sample water with the optional 650 field display.

Data Management

HydroSAM can be configured to either interface direct to SCADA using eight scaleable 4-20mA outputs or MODBUS or to log internally and transmit data via GSM or radioto a central base station. Data can be transmitted at user-defined frequencies and both local and host alarm conditions can be set so that the system can isse alerts when neccessary.

 

Two versions are available:

The 6600 V2-4 with and the 6600 V2-2 with
  • 4 optical ports
  • Conductivity/temperature port
  • pH or pH/ORP port
    (NEW wiped sensor available)
  • Two optical ports
  • Conductivity/temperature port
  • Rapid Pulse DO port
  • pH or pH/ORP port
  • 3 ISE ports

 

Medium Fresh, sea or polluted water
Temperature Operating
Storage
-5 to +50°C
-10 to +60°C
Communications RS-232, SDI-12
Software EcoWatch®
Dimensions Diameter
Length, no depth
Length, with depth
Weight
3.5 in, 8.9 cm
19.6 in, 49.8 cm
21.6 in, 54.9 cm
7 lbs, 3.18 kg (batteries installed, with depth)
Power External
Internal
12 V DC
8 C-size alkaline batteries

 

Range Resolution Accuracy
ROX™
Optical Dissolved Oxygen•
% Saturation
0 to 500% 0.1% 0 to 200%: ±1% of reading or 1% air saturation, whichever is greater;
200 to 500%: ±15% of reading
ROX™
Optical Dissolved Oxygen•
mg/L
0 to 50 mg/L 0.01 mg/L 0 to 20 mg/L: ± 0.1 mg/L or 1% of reading, whichever is greater;
20 to 50 mg/L: ±15% of reading
Dissolved Oxygen••
% Saturation
6562 Rapid Pulse™ Sensor*
0 to 500% 0.1% 0 to 200%: ±2% of reading or 2% air saturation, whichever is greater;
200 to 500%: ±6% of reading
Dissolved Oxygen••
mg/L
6562 Rapid Pulse™ Sensor*
0 to 50 mg/L 0.01 mg/L 0 to 20 mg/L: ± 0.2 mg/L or 2% of reading, whichever is greater;
20 to 50 mg/L: ±6% of reading
Conductivity•••
6560 Sensor*
0 to 100 mS/cm 0.001 to 0.1 mS/cm
(range dependent)
±0.5% of reading + 0.001 mS/cm
Salinity 0 to 70 ppt 0.01 ppt ±1% of reading or 0.1 ppt,
whichever is greater
Temperature
6560 Sensor*
-5 to +50°C 0.01°C ±0.15°C
pH
6561 Sensor*
0 to 14 units 0.01 unit ±0.2 unit
ORP -999 to +999 mV 0.1 mV ±20 mV
Depth Deep
Medium
Shallow
Vented Level
0 to 656 ft, 200 m
0 to 200 ft, 61 m
0 to 30 ft, 9.1 m
0 to 30 ft, 9.1 m
0.001 ft, 0.001 m
0.001 ft, 0.001 m
0.001 ft, 0.001 m
0.001 ft, 0.001 m
±1 ft, ±0.3 m
±0.4 ft, ±0.12 m
±0.06 ft, ±0.02 m
±0.01 ft, 0.003 m
Turbidity•
6136 Sensor*
0 to 1,000 NTU 0.1 NTU ±2% of reading or 0.3 NTU,
whichever is greater**
Nitrate/nitrogen•••• 0 to 200 mg/L-N 0.001 to 1 mg/L-N
(range dependent)
±10% of reading or 2 mg/L,
whichever is greater
Ammonium/ammonia/
nitrogen••••
0 to 200 mg/L-N 0.001 to 1 mg/L-N
(range dependent)
±10% of reading or 2 mg/L,
whichever is greater
Chloride•••• 0 to 1000 mg/L 0.001 to 1 mg/L
(range dependent)
±15% of reading or 5 mg/L,
whichever is greater
Rhodamine• 0-200 μg/L 0.1 μg/L ±5% reading or 1 μg/L,
whichever is greater
• Maximum depth rating for all optical probes is 200 feet, 61 m. Turbidity and Rhodamine are also available in a Deep Depth option (0 to 200 m).
•• Rapid Pulse is only available on 6600 V2-2 (two optical ports version).
••• Report outputs of specific conductance (conductivity corrected to 25° C), resistivity, and total dissolved solids are also provided.
These values are automatically calculated from conductivity according to algorithms found in Standard Methods for the Examination of Water and Wastewater (ed 1989).
•••• Freshwater only. Maximum depth rating of 50 feet, 15.2 m.
6600 V2-2 has 3 ISE ports; not available on the 6600V2-4.
**In YSI AMCO-AEPA Polymer Standards.

 

Range Detection Limit Resolution Linearity
Blue-Green Algae
Phycocyanin•
~0 to 280,000 cells/mL†
0 to 100 RFU
~220 cells/mL§ 1 cell/mL
0.1 RFU
R2 > 0.9999**
Blue-Green Algae
Phycoerythrin•
~0 to 200,000 cells/mL†
0 to 100 RFU
~450 cells/mL§§ 1 cell/mL
0.1 RFU
R2 > 0.9999***
Chlorophyll•
6025 Sensor*
~0 to 400 μg/L
0 to 100 RFU
~0.1 μg/L§§§ 0.1 μg/L Chl
0.1% RFU
R2 > 0.9999****
Maximum depth rating for all optical probes is 200 feet, 61 m. Also available in a Deep Depth option (0 to 200 m).
RFU = Relative Fluorescence Units
† Explanation of Ranges can be found in the ‘Principles of Operation’ section of the 6-Series Manual, Rev D. § Estimated from cultures of Microcystis aeruginosa.
§§ Estimated from cultures Synechococcus sp.
§§§ Determined from cultures of Isochrysis sp. and chlorophyll a concentration determined via extractions.
**For serial dilution of Rhodamine WT (0-400 ug/L).
***For serial dilution of Rhodamine WT (0-8 μg/L).
****For serial dilution of Rhodamine WT (0-500 ug/L).
*Sensors with listed with ETV logo were submitted to the ETV program on the YSI 6600EDS. Information on performance characteristics of YSI water quality sensors can be found at www.epa.gov/etv, or call YSI at 800.897.4151 for the ETV verification report. Use of ETV name or logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Form Object

 

 

 

<< Back to Products page