Whether you conduct laboratory analysis for Brix, TOC, BOD, dissolved oxygen, pH, ISEs or conductivity, Xylem Analytics lab products will make your job easier.
- Biochemistry & Chemical Analysers
- Thermometers & Data Loggers
- General Laboratory Meters
- Refractometers & Polarimeters
The YSI 2900 features an intuitive graphical user interface, a USB port for data retrieval, and the ability to measure samples from a variety of sample holders including 96 well plates and microcentrifuge tubes, making 2900 series analyzers the easiest to use and most cost effective way to measure the following chemistries in a wide range of application areas.
YSI 2900 Biochemistry Analyzer with YSI 2960 Online Monitor and Control System.
YSI has earned a reputation as the Gold Standard in bio-analytical instruments with highly accurate sensors and rapid results. The key to generating analyte-specific results in 60 seconds or less is YSI's innovative biosensor technology.
The Aurora 1030C TOC Analyzer processes aqueous samples for analysis of the total organic carbon (TOC), total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC) content of the samples. Samples containing 100 ppb to 30,000 ppm of organic carbon can be analyzed. The Aurora 1030C supports USEPA-approved methods, Standard Methods, ASTM, DIN/ISO/CEN, and EU Methods. Depending upon the protocol employed, up to 300 samples per 24-hour period can be analyzed, and in excess of 100,000 samples per year.
The 1088 Rotary Autosampler is specifically designed to operate with the Aurora 1030W TOC analyzer or Aurora 1030C TOC analyzer. The 1088 autosampler aspirates liquid samples from vials and transfers each sample aliquot to an Aurora 1030 TOC analyzer for analysis. A removable 88-position autosampler tray loads the sample vials for fully automated, unattended operation.
The FS 3700 Automated Chemistry Analyzer is an advanced continuous flow analyzer designed to improve laboratory productivity by automating wet chemistry test procedures.
OI Analytical's patented* Model 5380 Pulsed Flame Photometric Detector (PFPD) represents the latest advance in flame photometric detector design, optimizing selective detection of sulfur, phosphorus, and 26 other compounds.
The OI Analytical 9210p On-line Total Organic Carbon (TOC) Analyzer is designed to continuously monitor TOC levels in process water streams. The 9210p uses proven heated persulfate oxidation technology for accurate, dependable operation and regulatory compliance. Virtually all organic compounds dissolved in water can be oxidized with high efficiency by this technique.
The new burette TITRONIC® 300 not only allows you to perform dosing operations quickly and easily but also accomplishes manual titrating operations without difficulty. The burette can be used with all dosing liquids, solvents and titrants.
TitroLine® 6000 is with its spectrum of benefits the ideal entry into the potentiometric titration and the perfect choice for applications in the field of food, water/waste water and environmental analysis. Thanks to the high-resolution and precise pH/mV and "dead-stop" measuring interface is it possible to determine a wide range of parameters.
Schott Titroline 7000 pH Titrator with innovative features for simple and easy operation–without sacrificing accuracy. It can store up to 50 user methods with new intelligent, interchangeable modules and lexible configuration features. Perfect for non-aqueous titrations.
Beside the features which are mentioned in the general part of the titration family, the TitroLine® 7500 KF offers more performance and is the volumetric generalist for a wide range of use.
The TitroLine® 7800 enhanced the universal features of the TitroLine® 7750 with an additional IDS® measurement input. Hence the TitroLine® 7800 is able to perform potentiometric titrations with analogue or IDS® electrodes up to volumetric Karl Fischer titrations. The IDS® measuring input is multifunctional. Digital sensors for the determination of pH and ORP value, the conductivity up to the dissolved oxygen can be connected.
The easy to use data loggers with USB connection monitor the temperature and/or humidity during transport and storage of sensitive goods like medicine, food, serums etc. The EBI 300 and EBI 310 USB data loggers are suitable for multi-use, the EBI 330 USB data loggers are single-use versions which can be ordered preconfi gurated and are used especially when returning a more expensive multi-use data logger to the sender after a shipment is diffi cult. Please contact us for more information.
The Ebro TFX 410 thermometer is ideal for all manner of applications within the food processing industry as well as other applications where deep sample penetration is required such as in the Mash Tun of a brewing process or deep within a cooking sauce that requires a critical temperature to be reached. The instrument has a detachable probe and many different styles of temperature sensor are available making this a most versatile instrument for measuring temperature within a critical process.
Finding a simple and reproducible means of testing correct endoscope washer-disinfector functionality has been a problem which has remained unsolved until now. The corporate developed Routine Control Set by ebro Electronic and spypach medical services now allows reproducible tests to be performed on the cleaning and disinfecting performance of various makes of device.
ebro Electronic and spypach medical services offers a flexible and reproducible test system for the validation of processes in endoscope washer-disinfectors according to ISO 15883. The pressure and temperature can be monitored with the data logger EBI 11 at exact defi ned positions inside the dummy. Commercial stainless steel test plates can be used for the validation of the cleaning performance. A test contamination according to EN ISO 15883 part 5 is also possible.
Very flexible data logger system to perform validations for various thermal processes in the DAC Universal and benchtop autoclaves according to ISO 17665 / DIN SPEC 58929 as well as washer disinfectors according to ISO 15883. This reliable system consists of user-friendly mini data loggers that can be placed directly in the processes and a software package for a simple evaluation of the data and an easy creation of test reports.
Application oriented benchtop sets for multiple parameter monitoring: pH, mV, ISE, saturation, concentration, partial pressure, conductivity, special resistance, salinity, TDS, temperature
Cutting edge technology from WTW for demanding laboratory applications. Two digital inoLab® multi-parameter instruments for IDS sensors for parallel measuring of one identical or varying parameters. Up to three sensors (inoLab® Multi 9430 IDS) can be connected. A large glass shield protects the graphic display and supports the presentation of the measuring values and recognition of important information. The innovative and antibacterial keypad helps to protect against microbiological contamination. The solid zinc die-casting lower case gives the meters a safe standing and also protection from the environment. As a special feature, both models can be upgraded with an additional module for conventional pH measurement.
The inoLab® family: Advanced measuring technology offers new functions including automatic AutoRead or CMC (Continuous Measurement Control) making measurements more convenient and reliable than ever.
The user interface, large display and keypad with tactile feedback provide an exceptional user experience and error-free operation.
All benchtop meters are available in application oriented sets including sensors and accessories.
- Lab precision, suitable for drinking water
- Adjustable calibration intervals and GLP-compliant documentation
- Stray light behavior according to pharmacopoeia 5.0
Connect digital IDS sensors to the Inolab for the measurement of pH, ORP, conductivity, and DO/BOD.
- Uncompromised measuring accuracy
- Digital sensor recognition
- Smart sensor evaluation
YSI MultiLab ProODO instrument provides easy to use and calibrate menu-driven operation ideal for the laboratory, with special BOD features.
Precise pH/ISE benchtop meter with enhanced ISE methods for concentration measurement with ion selective electrodes
- Simultaneous measurements of pH, ion concentration or ORP
- Flexible and convenient data transfer
- Visualization of the optimum measuring range supports correct measurements (CMC function)
To heat up liquids quickly and safely, SI Analytics hotplates SLK 12 are the optimum solution. The heating power can be adjusted in 9 steps and heats up to 1.7 kW (with extended hotplate step 2 and the 230 V version only).
Using our new SI Analytics laboratory stirrer with heating, the process of mixing liquids can be selected from careful to intense, and the device can be also be used for speedy heating up or controlled temperature adaptation.
Our 2nd generation of Handylab devices offers analog or digital options for the measurement of pH, ORP, dissolved oxygen and conductivity in the lab and in the field.
Steam-sterilizable, low-maintenance pH and redox electrodes, also with built-in temperature sensors for applications in biotechnology, food technology and process chemistry
Our Memosens® program contains pH and redox electrodes. They are compatible to all at the market available measuring devices based on the Memosens® protocol. Following the in the analog segment already established electrodes of the series ProcessLine, SteamLine and annular-gap electrodes our new Memosens® electrode program also contains the upcoming FlowLine series. FlowLine is a new line of liquid-electrolyte electrodes with integrated plastic miniature pressure adapter for the hose connection to the electrolyte reservoir. All Memosens® electrodes are equipped with a NTC 30 kΩ temperature sensor.
Launched in 2015, the new RFM900-T Series refractometers combine latest opto-electronic principles with durability and ease of use via a touchscreen user interface.
Refractometers play a small but vital role within the life science sector for both human and veterinary use. Whether the need is to control the sugar content of sports drinks prior to consumption or to track hydration levels of athletes taking part in a sporting event, the duo scale OPTi-Sport is the right tool for the job. Similarly in the veterinary field, the OPTi-Vet is used to ascertain sugar levels of animal urine, large and small, as part of a diagnostic procedure.
Available as single, dual and multiple wavelength derivatives not only covering the visible spectrum, the ADP600 Series of Peltier temperature controlled polarimeters are capable of measuring optical rotation to four decimal places in the highly sensitive ultra-violet region. This capability makes the instrument particularly suited for use by scientists wishing to measure chiral compounds and other optically active substances in the chemical, pharmaceutical and food sectors as well as for use in academic research.
The ADP440+ is single wavelength, high accuracy polarimeter suitable for use in many applications and is especially suited for use in pharmaceutical laboratories where compliance with Pharmacopoeia¹ is required. New optics featuring a 'no maintenance' yellow LED and interference filter together with a photodiode detector allows reading of samples of up to 3.0 OD. The instrument has both angular and sugar scales (ISS) and can be programmed with user scales as well as industry standard methods for displaying concentration and specific rotation directly.
Since 1996, the ADP range of polarimeters has become one of the world's most popular general-purpose automatic polarimeters. Building on the experience gained over the past decade of polarimeter design, Bellingham + Stanley continue the tradition by introducing the ADP410, incorporating up to date technology and delivering a high quality instrument at an affordable price. The ADP410 provides all the measurement performance of its predecessor, the ADP220, but with less software features.